SystemStak™ Flow Control Valves
These valves are adjustable, non-compensated flow restrictors. An integral check valve around the regulating orifice allows free flow in one direction and metered flow in the other.
Control is available in “A” only, “B” only, and “A” and “B” ports as an “X” type (meter–in) or “Y” type (meter-out).
The “P” port is available only in the “X” type (meter-in) and does not contain a reverse flow check.
The valve flow setting is adjustable by means of either a hex key adjusting screw and locknut, a hand-adjust knob, or a micrometer knob with keylock.
A normal or fine metering capability is available.
SystemStak™ Pressure Compensated Flow Control Valve
These valves regulate flow by means of an adjustable orifice. Flow through the valve is pressure compensated.
Currently this function is available in a single line version, without check valve.
Adjustment option is only available with handknob. Please contact us for availability of other options.
SystemStak™ Flow Divider Valve
This flow dividing valve divides flow equally between the “A” port and the “B” port with flow generated in “P” port.
Note - The flow divider valve should not be applied where cylinder synchronization is important.