HY-TTC 60 is a powerful electronic control solution for off highway industries that is well-suited for the rough conditions in which it is used. It is part of a complete and compatible product family and is protected by a compact, automotive-style housing suited to mobile applications.
Features
All I/O's and interfaces mentioned below are protected against short circuit to GND and BAT+.
CPU Core
- 16/32-bit Infineon XC2287 microcontroller, 80 MHz, 768kB int. Flash, 82kB int. RAM
- 64kbit EEPROM
Interfaces
- 1 x RS-232 and 1 x LIN serial interfaces
- 2 x CAN, 125 kbit/s up to 1 Mbit/s
Outputs
- 8 x digital OUT 2A high-side, PWM, configurable as timer inputs
- 8 x digital OUT 4A high-side, configurable as analog inputs
Inputs
- 8 x analog IN 0 to 5V or 0 to 20 mA / 10bit, configured by software alternative use as resistive measurements
- 4 x current feedback, configurable as digital outputs/ low side 2 A
- 4 x digital IN (4 timer 0.1Hz to 10 kHz)
- 8 x digital IN
Other
- Internal: monitoring of board temperature, sensor supply and battery
- 1 x sensor supply 8.5/10.0/14.5 V configurable
- 2 x sensor supply 5V
Software
- Programming: C/C++, CODESYS® 2.3 including support for CANopen®
All I/Os and interfaces are protected against short circuit to GND and BAT+ and can be configured by software.
All analog inputs use 10 bit resolution.
All analog voltage inputs can be used as digital inputs with configurable switching levels and hysteresis.
Dedicated power supply pins for high side outputs.
Details to the standards can be found in the user manual.
Specifications
Parameter |
ECU Dimensions | 147.6 x 180.3 x 39.8 |
Dimensions for Minimum Connector Release Clearance | 197.7 x 202.8 x 39.8 |
Weight | 650 g |
Connector | 48 pins |
Operating Temperature | - 40 to +85 °C (full load) - 40 to +105 °C (lim. load) |
Operating Altitude | 0 to 4000 m |
Supply Voltage | 8 to 32 V |
Peak Supply Voltage | 45 Vmax |
Max Idle Current | 0.15 at 9V |
Standby Current | 0.5 mAmax |
Total Load Current | 25 Amax |
Standards |
CE-Mark | 2014/30/EU |
E- Mark | ECE-R10 Rev.4 |
EMC | ISO13766, up to 200 V/m, 20 MHz to 1GHz |
ESD | IEC61000-4-2 |
Load Dump | ISO7637-2, 173 V, 2 Ohm |
Ingress Protection | EN 60529 IP67 ISO 20653 IP6k9k |
Temperature | EN 60068-2-1, -14Nb, -2, -78, -30 |
Vibration, Shock, Bump | IEC 60068-2-29,-64, -27, -32 |
Housing and Connector
- Aluminum pressure die-cast housing
- Water-proof 80-pin connector
- Pressure adjusting with water barrier