Eaton’s new Guardian Sleeve is designed to provide protection against hydraulic hose failure by containing pressure and fluids that may escape during a hose burst or pinhole leak.
Properties |
Specification |
Description |
Burst pressure |
16,000 psi |
Capable to contain hose burst |
Pin hole leak pressure |
4,000 psi |
Sustained 4,000 psi pin hole |
Abrasion cycles |
250,000 |
Holds up to 250,000 abrasion |
Denier: 1260
Melting Point: 215˚C/420°F
Material: Polyamide 6, made with pre-dyed yarn
Dim. Stability: Great resistance to sun, atmospheric agents and aging
Toxicity: Non-Toxic
Color: Black
Packing Requirements: Eaton Guardian Sleeve comes in a 300 foot roll with no more than 3 cuts per roll and no piece shorter than 30 feet.
Note: must be ordered by the roll.
Assembly Instructions:
1. Select the correct sleeve part number for the hose.
2. Cut the sleeve 2 inches longer than the cut length of the hose to allow full hose bend radius.
3. The ends of the sleeves must be seared to prevent sleeve from fraying.
4. Slide the sleeve over the hose.
5. Properly assemble the hose ends.
6. Secure the sleeve over hose sockets with a metal banding product.