KBHDG5V8 Proportional Two-Stage Directional Valves Servo Performance with Double Spool Feedback

KBHDG5V8 proportional directional valves come with control amplifiers built directly on, and prewired to the valves. Factory-set adjustments of gain, spool deadband compensation, and offset ensure high valve-to-valve reproducibility. The only electrical inputs required are power supply (24V) and a voltage command signal of ±10V. The amplifier is housed in a robust metal enclosure, sealed against ingress of water and other fluids. Electrical connections are via a standard 7-pin plug. A spool position monitor point allows the function of the valve to be electrically monitored. Ramp functions, if required, can be generated externally

Features and benefits

• Factory-sealed adjustments increase valve-to valve reproducibility.
• Valve with integrated amplifier selected, ordered, delivered and installed as one performance tested package.
• Electronic feedback LVDT ensures accurate spool position control.
• Vibration and shock tested.
• Standard 24V DC supply with wide tolerance band.
• Wide range of spool and flow rate options.
• Standard ± 10V DC and 4-20mA command signals.
• Installation wiring reduced and simplified.
• Standard 7-pin connector.
• Simple valve removal and replacement for service.
• Supported by auxiliary function modules.
• Full CE electromagnetic compatibility. - 2014/30/EU
• IP65 and IP67 environmental protection rating.
• Optional valve enable function.
• Optional pilot pressure reducer.