The SC400 Controller is a full featured lubrication control, offering “two plus one” functionality: Two independent lubrication zones may be programmed with a single controller, plus control of one automatic reservoir fill system.
The SC400 Controller has the ability to operate a single pump and two zone valves (e.g. frequent/infrequent lubrication cycles) or two separate pumps (e.g. one oil pump and one grease pump). Each zone operates independently. (“Two zone” feature is not available for Dualine electric systems or for systems that require after blow).
For single zone systems, the SC400 Controller also offers two intervals (e.g. weekday/weekend). Using an external switch, the customer can quickly change lubrication intervals between two sets of off time. The SC400 also incorporates an automatic fill feature. The controller can activate a fill pump as needed to maintain proper fluid levels in the oil or grease reservoir.
The SC400 operates in any of five system modes:
Technical Data
Input Voltage | 85 to 265 VAC, 50/60 Hz |
Current Consumption | 80 mA at 115 VAC (less load) 40 mA at 230 VAC (less load) |
Pump Output Rating | 8 amp (85 to 265 VAC) |
Output Rating (line A & B) | 8 amp (90 to 250 VAC) |
Enclosure Rating | IP-56 |
Ambient Temp. Range | 14° F to 131° F (-10° C to 55° C) |
Storage Temp. Range | -40° F to 185° F (-40° C to 85° C) |
Vibration | 2 g at resonant (3 axis) |
Idle Time Range | 1 second to 100 days |
Machine Cycle Counts | 1 to 999,999 Counts (30 counts/second at 50% duty cycle) |
Watchdog Timer | 1 second to 60 minutes |
Monitor Time | 1 second to 24 hours |
Timing Accuracy | 0.01% (crystal controlled) |
Cycle Counts On | 1 to 999 counts |
Over Counts | 0 to 9 |
Net Weight | 5 lb |
Length x Width x Height | 12.3” x 9.2” x 5” |
Permanent Memory | FLASH |
Fault Relay Contacts | 5 amp |
Features