Reader-PT-RF Pressure Transmitter Reader

The hand-held readers transfer the energy required for a measurement to the pressure transmitter using RFID technology. All that is required is a maximum distance of 1.5 cm (0.6 in) from the antenna to the tip of the pressure transmitter for the duration of the measurement. When the pressure transmitter is activated by the press of a button, a current measured value is determined within only 0.5 seconds and then immediately transmitted back to the reading device together with other relevant information and then output on the illuminated display and stored. Over 15,000 of these measurement sets can be stored in the internal memory of the device.

PC Software

The software included with the delivery allows transmission of the stored measured values from the reading device to the PC, subsequent evaluation and export, e.g. to Microsoft Excel®.

Technical Data

Material

• Housing made of ABS

Dimensions/Weight

• Dimensions: 76 x 35 x 240 mm (3.0 x 1.38 x 9.45 in)
• Weight: 220 g (.49 lbs)

Measurements/Display

• Pressure: in bar and PSI
• Temperature: in °C and °F
• Display: graphic, LED backlit
• Visible area: 55 x 46 mm (2.17 x 1.81 in)
• Resolution: 128 x 64 Pixel

Power Supply

• Battery: Lithium Ion (3,7 V DC/900 mAh)
• Operating time approx. 6h (approx. 1800 individual measurement)

Temperature Range

• Ambient temp.: -20 °C to +70 °C (-4 °F to +158 °F)
• Storage temp.: -25 °C to +60 °C (-13 °F to +140 °F)
• CE certified

Electrical Data/Interface

• Sampling rate: typ. 250 ms/max. 400 ms
• Interface: Micro USB
• EMV: EN 61326-1:2013 EN 300330

Protection Rating

• IP65 protection rating: Dust tight and protected against water jets

PC Software

The software included with the delivery allows transmission of the stored measured values from the reading device to the PC, subsequent evaluation and export, e.g. to Microsoft Excel®.