Sensor-PPC-CAN-PT Pressure/Temperature Sensors

The CAN Pressure/Temperature Sensor-PPC-CAN-PT are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers.

Most technical details are the same as with the Pressure/Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.

Due the sturdy Stainless Steel design, the quick response time (<1 ms) and the high accuracy (±0,25% FS typ.) with automatic sensor recognition, the pressure/temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.

Connecting the CAN Pressure/Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.

Technical Data

• Sturdy Stainless Steel housing (1.4301)
• FKM (Viton®) gasket
• Sensor identification LED
• Weight: 200 g (.44 lbs)
• Suitable for gases and liquids
• 5-pin SPEEDCON connection plug
• Pressure connection G1/2 (without adaptor)

Ambient Conditions (Screw-in Temperature Sensor)

• Media temperature: -25 °C to +105 °C (-13 °F to +221 °F)
• Ambient temperature: -25 °C to +85 °C (-13 °F to +185 °F)
• Storage temperature: -25 °C to +85 °C (-13 °F to +185 °F)
• Compensated range: 0 °C to +85 °C (+32 °F to +185 °F)
• Load cycles (106): 100

CANopen Interfaces

• CANopen protocol profile DS406 v3.2 with manufacturer-specific additions
• LSS service DS305 v2.0

Electrical Data

• Response time: 1 ms
• Vibration loading: acc. to IEC 60068-2-6 (20 g)
• Shock loading: acc. to IEC 60068-2-27 (50 g)

Connection Adaptors for PPC Sensors

In addition to the CAN Pressure/Temperature Sensors, different adaptors and adaptor sets are available that not only connect to the STAUFF Test 20 (SDA-20-G1/2-W3), but also to the Test Couplings of the STAUFF Test 15/12/10 series (SAD-20/15-B-W3, SAD-20/12-B-W3, SAD-20/10-B-W3).