Sensor-PPC-04/12-P Pressure Sensors

The Pressure Sensor-PPC-04/12-P can be used with all analogue Hydraulic Testers of the PPC series, due to their 5-pin connection. Due their sturdy Stainless Steel design, the quick response times (<1 ms) and the high accuracy (±0,25% FS typ.) with automatic sensor recognition, the Pressure Sensors are a reliable and flexible solution for the Hydraulic Testers of the PPC series.

Note: A Connection Cable-PPC-04/12-3 (3m (9.84 ft)) is needed to connect the Pressure Sensor-PPC-04/12-P to the current Hydraulic Testers. An Extension Cable-PPC-04/12-5-EXT (5m (16.40 ft)) is also available as an option.

Technical Data

• Sturdy Stainless Steel housing (1.4301)
• FKM (Viton®) gasket
• Weight: 85 g (.19 lbs)
• Suitable for gases and liquids
• 5-pin connection
• Pressure connection G1/4 (without adaptor)

Ambient Conditions

• Media temperature: -25 °C to +105 °C (-13 °F to +221 °F)
• Ambient temperature: -25 °C to +85 °C (-13 °F to +185 °F)
• Storage temperature: -25 °C to +85 °C (-13 °F to +185 °F)
• Load cycles (106): 100

Electrical Data

• Input voltage: 9 to 36 V DC
• Output signal: 0 to 3 V DC
• Response time: 1 ms
• Long-term stability: < 0,2 % FS /a
• Vibration loading: acc. to IEC 60068-2-6 (20 g)
• Shock loading: acc. to IEC 60068-2-27 (50 g)

Connection Adaptors for PPC Sensors

In addition to the Pressure Sensors, different adaptors and adaptor sets are available that not only connect to the STAUFF Test 20 (SDA-20-G1/4-W3), but also to the Test Couplings