Sensor-PPC-04/12-SDS-CAB Rotational Speed Sensor

The Sensor-PPC-04/12-SDS-CAB Rotational Speed Sensor allows non-contact speed measurement of rotating components. The sensor is based on a opto-electrical measurement principle that determines the rotational speed with high accuracy using a reflecting strip on the shaft.

The contact rotational speed measurement is obtained by using a Contact Adaptor that is mounted to the sensor, and which makes contact with the rotating component during measurement.

This also produces high-accuracy measurement results. In the case of especially small areas, using the focusing adaptor facilities measurement.

Note: The analogue Rotational Speed Sensor-PPC-04/12- SDS-CAB can only be used with analogue Hydraulic Testers.

Technical Data

• Material: ABS
• Weight: 230 g (.51 lbs)
• 5-pin connection
• Both contacting and non-contacting measurement possible
• Type of measurement: optical, red LED

Ambient Conditions (Screw-in Temperature Sensor)

• Ambien temperature: 0°C to +70°C (+32°F to +158°F)

Measuring Range

• Measuring range: 20 to 10000 1/min
• Measuring distance: 25 to 500 mm (1 to 20 in)
• Measuring angle: ±45 °C
• Accuracy: ≤±0,5 % FS*
• Resolution: ±5 1/min

Electrical Data

• Input signal: 0 to 3 VDC
• Output signal: 7 to 12 VDC

Note: We recommended not extending the 2 m (6.56 ft) permanent cable connection provided on the sensor.