Sensor-PPC-04/12-PT Pressure/Temperature Sensors

The Pressure/Temperature Sensor-PPC-04/12-PT can be used with all Hydraulic Testers of the PPC series, due to the 5-pin connection. This sensor is able to measure and display temperatures on the Hydraulic Testers.

Due the sturdy Stainless Steel design, the quick response time (<1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the Pressure/Temperature Sensor is a reliable and flexible solution for the Hydraulic Testers of the PPC series.

Note:

• A Connection Cable-PPC-04/12-3 (3 m (9.84 ft)) is needed to connect the Pressure/Temperature Sensor to the current Hydraulic Testers.
• An Extension Cable-PPC-04/12-5- EXT (5 m (16.40 ft)) is also available as an option.

Technical Data

• Sturdy Stainless Steel housing (1.4301)
• FKM (Viton®) gasket
• Weight: 200 g (.44 lbs)
• Suitable for gases and liquids
• 5-Pin connection
• Pressure connection G1/2 (without adaptor)

Ambient Conditions (Screw-in Temperature Sensor)

• Media temperature: -25°C to+105°C (-13°F to +221°F)
• Ambient temperature: -25°C to +85°C (-13°F to +185°F)
• Storage temperature: -25°C to +85°C (-13°F to +185°F)
• Compensated range: 0°C to +85°C (+32°F to +285°F)
• Load cycles (106): 100

Electrical Data

• Input signal: 7 to 12 V DC
• Output signal: 0 to 3 V DC
• Response time: 1 ms
• Long-term stability: <0,2 % FS/a
• Vibration loading: acc. to IEC 60068-2-6 (20 g)
• Shock loading: acc. to IEC 60068-2-27 (50 g)

Connection Adaptors for PPC Sensors

In addition to the Pressure/Temperature Sensors, different adaptors and adaptor sets are available that not only connect to the STAUFF Test 20 (SDA-20-G1/2-W3), but also to the Test Couplings of the STAUFF Test 15/12/10 series SAD-20/15-B-W3, SAD-20/12-B-W3, SAD-20/10-B-W3).